SCM20ASL Pro

Overview

Compact very high performance active 2-way studio monitor
Ideally suited to:
– critical near-field listening applications in all control rooms
– LCR surround monitoring in small-to-medium control rooms
– surround channels in medium-to-large contol rooms
Proprietary ATC 150mm/6” Super Linear Mid/Bass Driver
Proprietary ATC 25mm/1” Dual Suspension ‘S-Spec’ Tweeter
Discrete MOSFET class A/B bi-amp pack. LF 200W & HF 50W

“These monitors deliver the goods and reveal accurate detail in all types of program material.” Audio Technology Magazine, April 2015

SCM20ASL Pro
Drivers: LF 6.5”/150mm Super Linear, HF 1”/25mm Dual-Suspension ‘S-Spec’ Tweeter
Amplitude linearity : 80Hz – 20kHz (+/-2dB)
Cut-off frequencies : 55Hz – 25kHz (-6dB freestanding)
Dispersion : +/-80° coherent horizontal, +/-10° coherent vertical
Maximum continuous : SPL 108dB (per pair @ 1m)
Audio input : Rear panel mounted female XLR (pin 2 +ve)
Input sensitivity : 1V/2V RMS or +2.2/+8.2dBu via switch (ref. bass full output)
Input sensitivity trim : 0dB to -6dB (via rear panel pot)
Total input sensitivity range : 1V/+2.2dBu to 4V/+14.2dBu
Input impedance : 10kΩ per leg
Amplifier output power : Bass 200W continuous, HF 50W continuous (1%THD)
Crossover frequency : 2.1kHz
Crossover filters : 2nd order/ 12dB/oct critically damped with phase compensation
Low frequency shelf cut/boost : 80Hz, -2dB to +3dB in 1dB steps (via rear panel rotary switch)
Overload protection : Active FET momentary gain reduction (inc. front panel mounted ‘limit’ LED)
Amplifier thermal trip circuit
Cabinet Dimensions (HxWxD) : 450x250x392mm (17.7″x8.8″x15.4″)
Weight : 28kg/61.6lbs (per cabinet)